EasyManua.ls Logo

Alarm.Com ADC-460L User Manual

Alarm.Com ADC-460L
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Rhein Tech Laboratories, Inc. Client: Alarm.com
360 Herndon Parkway Model: ADC-460L
Suite 1400 Standards: FCC 15.249
Herndon, VA 20170 IDs: YL6-143460L
http://www.rheintech.com Report #: 2015234
Page 30 of 49
Appendix L: Manual
Please refer to the following pages.
Question and Answer IconNeed help?

Do you have a question about the Alarm.Com ADC-460L and is the answer not in the manual?

Alarm.Com ADC-460L Specifications

General IconGeneral
ModelADC-460L
TypeControl Unit
CompatibilityAlarm.com ecosystem
Z-WaveYes
SirenBuilt-in
Battery BackupYes
Power SupplyAC power
Weight1.5 lbs
Operating Temperature32°F to 120°F
Cellular Radio4G LTE
Wi-Fi802.11 b/g/n
Wireless Frequency2.4 GHz

Summary

Appendix L: Manual

Introduction

Contact Information

Contact details for Alarm.com technical support and dealer portal.

Compatibility

States the module's compatibility with the Alarm.com System Enhancement Module.

Power Up

Troubleshooting LEDs

LED L1 (red)

Details red LED flashes indicating specific error codes and solutions.

LED L2 (yellow)

Describes the yellow LED for panel communication and Z-Wave status.

LED L3 (yellow)

Explains the yellow LED for radio unit and Alarm.com communication.

LED L4 (green)

Details the green LED indicating LTE signal strength.

LED L5 (yellow)

Describes the yellow LED indicating Z-Wave errors.

Various Module States (modes)

Idle Mode

Module state when AC power is on, not communicating with Alarm.com.

PowerSave Mode

Module state during low power or battery recharge.

Connected Mode

Module state actively communicating with Alarm.com.

Sleep Mode

Module state during low battery/AC failure, minimal power draw.

Specifications

Regulatory Information