12 | Door Controller
Specifications
The interface is for use in low voltage, Class 2 circuits only.
The installation of this device must comply with all local
INPUT POWER
PoE or 12V DC, 900 mA max.
OUTPUT POWER
650 mA @ 12V DC
INPUTS
One dedicated reader input
One switchable reader/two-wire RS-485 input
Two programmable inputs
One dedicated tamper input
OUTPUTS
Two relay outputs (2A @ 30V DC)
Single-wire LED control
Single-wire buzzer output
CERTIFICATIONS
HSPD-12/FIPS201 compliant
UL 294 and UL 294B recognized
ROHS
FCC Part 15 Class A
Without Bracket: 5.5 x 2.75 x 0.96” (140 x 70 x 24 mm)
With Bracket: 5.5 x 3.63 x 1.33” (140 x 92 x 34 mm)
TEMPERATURE
32°F – 158°F (0 – 70°C) operational
-67°F – 185°F (-55 – 85°C) storage
OPERATING HUMIDITY
10-95% (non-condensing) RH
To Next Page
Loading...
Need help?
General