Operate the Alarm.com Smart Thermostat
The Alarm.com Smart Thermostat (ADC-T3000 and ADC-T2000) can be operated locally in addition to the remote
control features on the Customer Website and app.
To locally operate the ADC-T3000:
Waking the device
1. Press any button to wake the thermostat up.
Note: The ADC-T3000 display cannot stay on permanently, but it can be configured to wake when motion is
detected nearby. For more information about enabling motion-detected wake, see Enable or disable motion-
detected wake on an Alarm.com Smart Thermostat (ADC-T3000).
2. After waking, the display will show the current mode, room temperature, and setpoint.
https://answers.alarm.com/ADC/Partner/Installation_and_Troubleshooting/Thermostats/Alarm.com_Smart_Thermostat_(ADC-…
Updated: Mon, 20 Apr 2020 19:39:44 GMT
1
To Next Page
Need help?
General
