Need help?Do you have a question about the Alarm.Com ADC-T3000 and is the answer not in the manual?
General| Brand | Alarm.Com |
|---|---|
| Model | ADC-T3000 |
| Category | Thermostat |
| Language | English |
Lists all components included with the thermostat.
Lists essential tools for installation.
Explains the function of each physical button on the thermostat.
Describes the illuminated indicators on the thermostat screen.
Details the available heating and cooling modes.
Verifies the HVAC system operates correctly before thermostat installation.
Instructs to disconnect power at the circuit breaker.
Guides on how to safely remove the existing thermostat cover.
Provides guidelines for safe and secure wire connections.
Details how to mount the thermostat back plate to the wall.
Explains connecting wires to the new thermostat terminals.
Guides on connecting the thermostat body to the back plate.
Instructs to restore power to the HVAC system.
Defines how the thermostat should operate the fan during heating cycles.
Specifies the type of auxiliary heating used by the heat pump.
Explains the use of dynamic terminals for auxiliary functions.
Instructions for modifying advanced thermostat settings.
Guides on switching temperature units.
Activates the screen when motion is detected.
Turns off the automatic mode selection.
Selects how the thermostat controls home humidity.
Adjusts the target level for removing moisture from the air.
Adjusts the target level for adding moisture to the air.
Controls ventilation systems like HRV/VRV via Z1/Z2 terminals.
Resets HVAC settings and configurations to default values.
Verifies the proper operation of the heating system.
Verifies the proper operation of the cooling system.
How to activate the thermostat display.
Adjusts the thermostat's operating mode and temperature.
Selects fan operation modes (AUTO, ON, CIRCULATE).
Guides on replacing the thermostat's batteries.
Manual configuration when automatic wire detection fails.
Accessing the installer menu for initial setup.
Unregisters the thermostat from the Z-Wave network.
Explains the compressor protection delay feature.
Clarifies the thermostat's role as a Z-Wave repeater.
Restores all settings, rules, and schedules to factory defaults.
To Next Page
