3
Thermostat overview
Buttons
MENU: Access options to change the
mode, fan, settings, and other features.
UP: Adjust setpoint up or navigate
the MENU.
DOWN: Adjust setpoint down or
navigate the MENU.
SELECT: Select options in the MENU.
Modes
HEAT: Will activate the heating system.
COOL: Will activate the air conditioner.
AUTO: Will select either the HEAT or COOL
mode automatically.
EMER: For use with heat pumps only. Will bypass the
heat pump and enable auxiliary/emergency heat.
OFF: The system will not heat or cool.
Display
HEATING: Illuminated in HEAT, EMER or AUTO
mode when the thermostat is calling for heat.
COOLING: Illuminated in COOL or AUTO mode
when the thermostat is calling for cool.
Illuminated when the thermostat is using one
or more Alarm.com Temperature Sensors.
Display
Up
Down
Menu
Select
Room Temperature
Setpoint
To Next Page
Loading...
Need help?
General
