Need help?Do you have a question about the Alarm.Com ADC-T2000 and is the answer not in the manual?
General| Type | Smart Thermostat |
|---|---|
| Display | Color Touchscreen |
| Humidity Sensor | Yes |
| Scheduling | Yes |
| Geofencing | Yes |
| Energy Reports | Yes |
| Compatibility | HVAC systems |
| Control Method | Mobile App, Voice Control |
| Dimensions | 4.5 x 3.5 x 1 inches |
| Operating Humidity | 5% to 95% (non-condensing) |
| Temperature Range | 40°F to 99°F (4°C to 37°C) |
Crucial safety guidelines for installation and operation, including power handling and voltage verification.
Mounting the back plate to the wall using provided hardware and optional trim plate.
Connecting the labeled wires to the new thermostat's terminals, including jumper settings.
Physically configuring system type (Heat Pump/Normal) directly on the thermostat.
Diagnosing why heating or cooling might not turn on when set points are adjusted.
Resolving issues where the heat pump operates in the wrong mode (heating/cooling).
To Next Page
