Alarm.Com ADC-T3000 - Humidity Setpoint Adjustments; Changing the dehumidifier setpoint; Changing the humidifier setpoint

13
Changing the dehumidifier setpoint
Ensure that the humidity mode selected
is either DEHUMID or AUTO.
1. Press the MENU button.
2. Select SETTINGS.
3. Select USER.
4. Select HUMIDITY.
5. Select SETPOINT.
6. Select DEHUMID.
7. Use the UPDOWN buttons to adjust
to the desired dehumidify setpoint.
Changing the humidifier setpoint
Ensure that the humidity mode selected
is either HUMID or AUTO.
1. Press the MENU button.
2. Select SETTINGS.
3. Select USER.
4. Select HUMIDITY.
5. Select SETPOINT.
6. Select HUMID.
7. Use the UPDOWN buttons to
adjust to the desired humidify setpoint.
NOTE: The thermostat enforces a 20%
"deadband" or minimum difference between
the minimum and maximum humidity setpoints.
Moving one of the setpoints within 20% of
the other will force the other setpoint to move
automatically to maintain the 20% deadband.