Alarm.Com ADC-VDB780B User Manual (English)

To Next Page

Charge the ADC-VDB780B battery

The Alarm.com Wireless Video Doorbell (ADC-VDB780B) battery can be charged using a 5V/1.5A USB wall charger

and the supplied charging cable.

To charge the ADC-VDB780B battery:

Note: A fully depleted battery takes approximately 7 hours to charge.

1. Unlatch the bottom of the mount.

2. Remove the VDB780B from the mount.

3. Separate the battery pack from the VDB780B body.

https://answers.alarm.com/Customer/Website_and_App/Video/Video_Settings/Charge_the_ADC-VDB780B_battery

Updated: Wed, 22 Mar 2023 10:13:56 GMT

Other manuals for Alarm.Com ADC-VDB780B

Need help?

Do you have a question about the Alarm.Com ADC-VDB780B and is the answer not in the manual?

General

Steps to unlatch the mount and separate the battery pack from the doorbell for charging.

Instructions to plug the micro USB cable into the battery pack and connect the charger to an outlet.

Details the charging LED color (orange for charging, green for complete) on the battery pack.

Explains LED indicators for when the battery pack is charging or fully charged.

Describes LED patterns indicating charging failure or issues.

Details LED indicators when the battery pack's temperature is too hot or too cold.