Alarm.Com Skybell HD Edition

To Next Page

Alarm.com Wi-Fi Doorbell Camera

Skybell® HD Edition

Questions?

Contact Alarm.com Dealer Support at support@alarm.com or find your

local number at the following website: www.alarm.com/dealersupport

US and Canada: 1.866.834.0470 | MX: 001.855.300.9897

• Before you begin, go through the Pre-Installation Checklist at:

alarm.com/doorbellinfo

• Install the doorbell camera hardware, replacing the existing

doorbell. Detailed instructions are available at:

alarm.com/doorbellinfo

• Download the Alarm.com Customer App from the App Store

or Google Play and log in using customer credentials.

(Doorbells installed using the Skybell App will not work

with Alarm.com.)

• Go to the Doorbell Camera section of the app and follow the

guided setup to Add a New Device. (The customer account

must have a service plan with the Doorbell Camera enabled.)

Need help?

Do you have a question about the Alarm.Com Skybell HD Edition and is the answer not in the manual?

Summary

Installation and Setup Guide

Pre-Installation Checklist

Follow the pre-installation checklist to ensure proper setup before installing the doorbell camera hardware.

Hardware Installation

Install the doorbell camera hardware, replacing the existing doorbell with detailed instructions.

Mobile App Setup

Download the Alarm.com Customer App and log in to add the doorbell camera via guided setup.

LED Reference Guide

Doorbell Camera LED Status Indicators

Understand the meaning of different LED light patterns for charging, booting, Wi-Fi connection, and operational modes.