Alarm.Com ADC-VDB770 - User Manual

Alarm.com Video Doorbell (ADC-VDB770) - Installation Guide
Use this guide to assist with the installation of your ADC-VDB770 doorbell camera.
Pre-installation checklist
Important: A Video Analytics service package and the Doorbell Cameras add-on is required to enroll the ADC-VDB770.
For more information about which service packages have Video Analytics, see What service packages can support
enrolling the ADC-VDB770?.
• ADC-VDB770 and included accessories
• Wire crimping tool
• Wi-Fi connection to broadband (Cable, DSL, or Fiber Optic) internet
Media, iframe, embed and object tags are not supported inside of a PDF.
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_Video_Doorbell_(ADC-VDB7…
Updated: Wed, 25 Oct 2023 20:50:59 GMT
1

Summary

Pre-installation Checklist

Installation Steps

Install the Power Module

Instructions for connecting the power module to the chime box.

Install the Alarm.com Video Doorbell

Steps for mounting the doorbell and connecting wires to the backplate.

Connect to Network

AP Mode (recommended)

Connect the doorbell to Wi-Fi using Access Point mode for setup.

WPS Mode (alternate)

Connect the doorbell to Wi-Fi using the WPS feature on your router.

Enrollment and Configuration

Enroll the Video Doorbell to the Account

Add the doorbell to your Alarm.com account via app or website.

Configure the Video Doorbell

Set chime type, mounting bracket, and notification rules for the doorbell.

Troubleshooting

Alarm.Com ADC-VDB770 Specifications