Need help?Do you have a question about the Alber e-fix and is the answer not in the manual?
Warnings about potential interference from radio wave sources like transceivers and cellular phones.
Crucial safety precautions for operating the e-fix, emphasizing instruction and user ability.
Defines the intended use of the e-fix for transporting persons with walking disabilities.
Step-by-step instructions for attaching the e-fix wheels to the wheelchair.
Guidance on how to detach the e-fix wheels from the wheelchair.
Fundamental safety guidelines and checks before driving the e-fix.
Importance of driver training and advice for initial driving attempts.
Detailed safety instructions covering operation, obstacles, and environmental factors.
Guidance on how to safely approach and overcome obstacles.
Instructions for correctly installing the battery pack into its holder.
Steps and guidelines for charging the e-fix battery pack.
Critical safety guidelines for using the battery charger and the charging process.
Specific safety precautions for handling and using the battery pack.
Instructions for attaching and detaching the control unit from its holder.
General overview of the functions and buttons on the control unit.
Procedure for powering on the e-fix system via the control unit.
Instructions for safely powering down the e-fix system.
How to control the e-fix movement using the joystick.
Procedure for connecting the attendant control unit to the e-fix system.
Steps to activate the attendant control system.
How to operate the e-fix using the attendant control.
General| Motor Type | Brushless DC motor |
|---|---|
| Weight Capacity | 100 kg |
| Wheel Size | 10 inches |
| Motor Power | 250W |
| Battery Voltage | 24V |
| Maximum Speed | 6 km/h |
| Control System | Joystick |
To Next Page
