39
Using the Alber anti-tippers
As shown in the diagram, press your foot on an anti-tipper.
Whilst doing so, pull the wheelchair by its handles a little upwards and to the rear
until the wheelchair has been raised and the anti-tippers click into a fixed position.
Now, you can fit or remove a wheel. If you are fitting or removing e-fix wheels, these
need to be switched off.
Repeat the process with the second anti-tipper on the other side of the wheelchair.
Once the wheels are fitted, you can return the anti-tippers to their starting position.
To do this, push the wheelchair forwards and at the same time push back the holding
rod [73] using your foot.
73
To Next Page
Loading...
