Albrecht AE 6290 - S-Meter Functionality; Automatic Channel Scan; Talkback Function; Resetting to Factory Settings

33
English
5.10. S-Meter
The S-meter shows the current signal strength. The strength is
indicated by the symbol in the lower left of the display.
The more bars are displayed, the stronger the signal.
5.11. Scan mode
Your AE 6290 radio has an automatic channel search that can
be used to view all channels one after the other.
• Long press
▲
Up or
▼
Down button for 5 seconds
• Scanning stops every time a signal is received and you
can listen in on the conversation.
If no action is taken, scanning will continue a) after communication
on the channels has ended or b) after approximately 5 seconds
of observation time, if communication takes longer.
• You can exit the scan mode at any time by pressing the
EMG or PTT key.
5.12. Talkback function
With the talkback functions you can hear your own modulation
for verication via the speaker of the AE 6290.
Press and hold the PTT transmit key and select the talkback
level with the ▲ / ▼ keys.
5.13. Resetting to factory settings
To reset the device to its factory settings, proceed as follows:
• Go to the main menu and select RESET
• If RESET is blinking in the display, press and hold the
MENU button until the blinking stops
• The radio is now reset to factory settings