To Next Page
C
Courtney HopkinsJul 31, 2025
What to do if the Albrecht Receiver scan won’t stop?
- EEmily GriffithJul 31, 2025
If the Albrecht Receiver scan won't stop, several factors could be at play. First, the squelch might need adjustment. Also, ensure that the antenna connection is secure. Another reason might be that one or more channels are locked out, so verify that the channels you want to scan are not locked out. It's also possible that the channel’s frequency isn’t stored in memory, so ensure the channel’s frequency is stored. Finally, the channel might not be active; in that case, wait for a transmission on the channel.
Frequency Coverage
