How to improve the reception on my Albrecht Scanner?
R
Ryan VanceAug 6, 2025
If you're experiencing poor reception on your Albrecht Scanner, here are a few things to try:
* Check the antenna connection and reposition it.
* Move the scanner to a different location.
* If you are in a remote area, consider using an optional multi-band antenna. Consult your dealer or local electronics store for options.
C
Charles SteeleAug 13, 2025
Why won't my Albrecht AE 33 U stop scanning?
J
Julie MorganAug 13, 2025
If your Albrecht Scanner won't stop scanning, here are some potential causes and solutions:
1. The squelch may need adjustment. Adjust the squelch threshold.
2. The antenna connection might be faulty. Check the antenna connection.
3. The channel's frequency might not be stored in the favorites. Ensure the channel's frequency is stored in the scanner's favorites bank.
4. The channel might not be active. Wait for a transmission on the channel.
N
Nicole SchultzAug 20, 2025
What to do if my Albrecht AE 33 U Scanner won't start scanning?
M
Mrs. Valerie HooperAug 21, 2025
If your Albrecht Scanner won't start scanning, consider the following:
* Ensure the scanner is in service or favorites mode by pressing (Srvc/Fav). If is showing, press (Hold) to resume.
* The squelch may need adjusting. Adjust the squelch threshold.
* Check the antenna connection.
M
Michael HernandezAug 28, 2025
Why does 'ErrChg' flash on my Albrecht AE 33 U?
T
Teresa BrownAug 28, 2025
If 'ErrChg' is flashing on your Albrecht Scanner, it means the battery cannot be charged, possibly due to an alkaline battery or a defective nickel metal hydride battery.