37English
These guidelines will help you install and use your new scanner:
! If your scanner receives interference or electrical noise, move the scanner or its
antenna away from the source.
! To improve the scanner’s reception, use an optional external antenna designed for
multiband coverage. (You can purchase this type of antenna at a local electronics
store). If the optional antenna has no cable, use 50 ohm coaxial cable for lead-in. A
mating plug might be necessary for the optional antennas.
! Do not use the scanner in high-moisture environments such as the kitchen or
bathroom.
! Avoid placing the scanner in direct sunlight or near heating elements or vents.
INSTALLING AND REPLACING BATTERIES
You can power your scanner using two AA batteries.
1. A.B,'/$*,'(),'5#4,*'-/'($*%,&'#>1
2. If the belt clip is attached, remove it (See page 12).
3. Slide the battery compartment cover.
SETTING UP YOUR SCANNER
To Next Page
Loading...
