Albrecht AE 33 U - TROUBLESHOOTING & WARRANTY; Improper Reception Issues; Scan Wont Stop Issues; Scan Wont Start Issues

51English
If your AE33U is not performing properly, try the following steps.
Problem Possible Cause Suggestion
Improper reception. The scanner’s antenna
might need to be adjusted.
Check the antenna connection or
move or reposition the antenna.
Move the scanner.
You might be in a remote area that
could require an optional multi-band
antenna. Check with your dealer or
local electronics store.
Scan won’t stop. The squelch might need to
be adjusted.
Adjust the squelch threshold.
See “To adjust the squelch” on
page 17.
The antenna might need
to be adjusted.
Check the antenna connection.
The channel’s frequency
might not be stored in
favourites.
Make sure the channel’s frequency
is stored in the scanner’s favourites
bank.
The channel might not be
active.
Wait for a transmission on the
channel.
Scan won’t start. The scanner must be
in service or favourites
mode.
Press (Srvc/Fav). If
is
showing press (Hold) to resume.
The squelch might need to
be adjusted.
Adjust the squelch threshold.
See “To adjust the squelch” on
page 45.
The antenna might need
to be adjusted.
Check the antenna connection.
ErrChg Flashes The battery cannot be
charged
The cause is an alkaline battery or a
defective nickel metal hydride battery.
TROUBLESHOOTING & WARRANTY