30 English
3.3 First Use
1. Mount the DR 56 In-Car DAB+ Radio adapter to the
windscreen using the provided suction cup mount.
2. Connect one end of the USB power supply cable to the
Micro USB socket in the DR 56 and the other end to
the dual USB car charger. Plug the dual USB car
charger to the car cigar-lighter socket.
3. Connect the supplied antenna to the antenna socket.
To mount the antenna correctly please refer to chapter
10.
4. Turn on the power with the “Power Switch” and the
display will show the Albrecht logo. Use the “Mode”
button to select the DAB+ mode.
5. For first time use, you need to scan all the local DAB+
channels by pressing and holding the “TX/Scan” button
for 3 seconds to activate the “Auto Scan”, all available
DAB+ radio channels will be scanned and saved until
another “Auto Scan” is performed. During scanning,
you can see a progress bar and the total amount of
channels received.
6. Once it is scanned, you can select any DAB+ radio
channel by turning the Tuning Knob.
To Next Page
Loading...
