38 English
Remark: The flashing of the Bluetooth icon indicates the
Bluetooth is not connected and once it is connected, the
icon will stop flashing.
7.2 Managing Phone Call
1. When there is an incoming call, the DR 56 rings with
a ringtone. Press the “Preset” button to answer a call
and at the same time the speaker phone volume and
talk time will be displayed at the bottom of the screen.
You may use Tuning Knob to adjust the volume level.
2. Press and hold the “Preset” button to decline a call
3. To end a call, press the “Preset” button again.
7.3 Phone Speaker Settings
1. Press and hold the “Menu” button to enter the menu.
2. Use the “Tuning Knob” to scroll down the menu to
select “Phone Speaker Setting”, press the “Menu”
button to confirm.
In the “Phone Speaker Setting” menu, use the
“Tuning Knob” to select “Built-in Speaker” or “Car
Speaker” and confirm by pressing the “Menu” button
again.
Press the “Mode” button to exit menu.
Use the “Tuning Knob” to adjust the voice volume to
your desired level when “Built-in Speaker” is selected.
When it is in “Car Speaker” mode, the voice volume
can only be adjusted by the car stereo volume control
button. A “Car Speaker” will be displayed at the
bottom of the LCD.
To Next Page
Loading...