Albrecht DR 56 - Device Configuration; Restore Factory Settings; Check Software Version

English 45
15 Restore factory setting:
1. Press and hold the “Menu” button to enter the menu
2. Use the Tuning Knob to scroll up or down to select
“Factory Reset” and confirm by pressing the “Menu”
button again
3. Use the Tuning Knob to select “YES” or “NO” for the
reset and confirm it by pressing the “Menu” button.
16 Checking the Software Version of the
device:
1. Press and hold the “Menu” button to enter the menu
2. Use the Tuning Knob to scroll up or down to select
“Software Version” and confirm by pressing the
“Menu” button to see the current software version of
the device.
3. Press the “Mode” button exit menu.