English 33
3.5.2 Select FM Transmitting Frequency (Manual):
1. Press the “TX/Scan” button to enter the FM
transmitting frequency selection mode.
2. Then use Tuning Knob to select your desired vacant
frequency (based on your past experience with the
known vacant frequency) which you would like to
receive by your car radio.
3. Once it is selected, press “TX/Scan” button to confirm
and exit or the screen will go back to DAB+ mode
automatically after 3 seconds and the selected
frequency will be shown at the top of the blue bar,
e.g. TX108.0MHz.
Remarks:
“Vacant frequency” means there is no radio broadcasting
content or noise when the frequency is selected.
To Next Page
Loading...
