Alcad CAD-704 - System Reset and Exit; Resetting the Device; Serial Number Identification; Exiting Settings

- 22 -
RESET
Select the RESET function and press
↵
to enter a second
safety menu RESET?
If you wish to cancel the operation select NO by pressing
▼ then press
↵
to confirm.
If you want to cancel all setting and restore the original
settings, confirm YES by pressing
↵
. The display will show
RESET OK for a few second to confirm the operation.
SERIAL NUMBER
Select SNBR. The number displayed on the right is the
univocal serial number of the product.
EXIT
To close the procedure select EXIT and press
↵
. Select YES
by pressing the
▲▼ keys and press
↵
to confirm.
If you wish to cancel the operation, select NO by pressing
▼ then press
↵
to confirm and carry on your setting
procedure.
Windows & Android applications
From the download area in our website www.alcadelectronics.com it is possible to download
a free PC compatible software to operate the amplifier from your PC. It also allows to save
and load configurations.
Hardware requirements
PC Windows compatible with USB interface
Processor 800MHz or more
256MB RAM
USB A-B cable
Software minimum requirements
Windows 7 or more recent operating system, Microsoft Framework .NET 3.5 or higher and
langpack (free download from Microsoft website).
Installation procedure
Close all the active applications (included antivirus programs)
Start the Setup.exe program
THR: 50dBuV
>RESET
RESET?
YES NO
RESET OK
RESET
>SNBR: 00001
EXIT
EXIT
YES NO