Alcatel-Lucent 4038 - 2 Using Your Telephone; Making a Call; Answering a Call; Using the Telephone in Hands Free Mode

Using your telephone
10
2
Other
2.1
Making a call
Dial the
number for
your call
Lift the
receiver
Number required Press the 'on-hook' key of
the Bluetooth® handdset
(Alcatel-Lucent IP Touch
4068 Phone)
Number required
Handsfree Number
required
Programmable line
key
Dial by name
You are on a call with
the destination
number
To make an external call, dial the outside line access code (9) before dialing your
party's number. The digit 9 is the default code for an outside line.
For the attendant, dial '0' (by default).
2
6
5
3
ab c
def
jkl
mn
o
OR
2
6
5
3
ab c
def
jkl
mn
o
OR
2
6
5
3
ab c
def
jkl
mn
o
OR
2
6
5
3
ab c
def
jkl
mn
o
OR
OR
Paul
in conversation
• If the internal or outside number does not reply:
2.2
Answering a call
2.3
Using the telephone in 'Hands free' mode
 Terminal idle:
Broadcast a message on
the loudspeaker of the
free terminal
Request callback to a
busy terminal
Send a written
message
Go to next screen
ForcedInter
OR
¤Callback
OR
Text
OR
Lift the
receiver
Press the 'on-hook' key
of the Bluetooth®
handdset (Alcatel-
Lucent IP Touch 4068
Phone)
Handsfree Press the key next to the
'incoming call' icon
OR OR OR
Paul
is calling
you are in handsfree
mode
Press and
release
Terminate
your call
end
The duration of your external call may be limited in time by the administrator.. In this
case, a beep sounds and/or a message will be displayed on the screen 20 seconds before
the end of the communication
Depending on how the system is configured, the name or number of the caller
is displayed on the screen. Pressing the 'i' key displays the name or number of
the caller on the screen. If the number is displayed by default, pressing the 'i'
key displays the name. If the name is displayed by default, pressing the 'i' key displays
the number.
more information on the
caller: successive presses
for nam
e
and n
u
mber
Depending on how the system is configured, the name or number of the caller
is displayed on the screen. Pressing the 'i' key displays the name or number of
the caller on the screen. If the number is displayed by default, pressing the 'i'
key displays the name. If the name is displayed by default, pressing the 'i' key displays
the number.