Alcatel-Lucent 4038 - Use of the Bluetooth Handset; Installing a Bluetooth Wireless Technology Headset (Matching); Using a Bluetooth Wireless Technology Headset; Deleting an Accessory (Headset, Handset, Etc.): Bluetooth Wireless Technology

Programming your telephone
31
8
8.17
Use of the Bluetooth® handset (Alcatel-Lucent IP Touch 4068 Phone)
The Bluetooth® cordless handset permits the user to answer and call with complete freedom within a radius of 10 meter from
the set.
•
Green flashing: normal operation.
•Green steady: handset charging.
• Orange flashing: battery charge low or handset outside coverage zone.
• Orange steady: malfunction.
• Off-hook/On-hook and Volume/Mute keys
8.18
Installing a Bluetooth® Wireless Technology headset (matching)
- Alcatel-Lucent IP Touch 4068 Phone
Before a Bluetooth® headset can be used, it must be correctly matched to the terminal. Before performing the matching
operation, the headset must be in detectable mode*.
* Refer to the user documentation supplied with the headset.
O
ff-hook/On-hook: press this key to take or
terminate a call.
Volume/Mute:
• short successive presses to change the
handset volume level (3 levels),
• long press to ensure your party no longer
hears you.
Reach the
'Menu' page
searching for Bluetooth®
equipment, wait until the detected
equipment type and the address is
displayed
Select the relevant
equipment
acknowledgement
message and display of the
headset icon on the
terminal screen
Confirm your
choice
Enter the PIN
code of the
headset *
Settings
Set
BlueTooth
Adddevices
2
6
5
3
ab c
def
jkl
mn
o
8.19
Using a Bluetooth® Wireless Technology headset - Alcatel-Lucent IP
Touch 4068 Phone
Refer to the user documentation supplied with the headset.
8.20
Deleting an accessory (headset, handset, etc.): Bluetooth®
Wireless Technology - Alcatel-Lucent IP Touch 4068 Phone
Reach the
'Menu' page
display of the different equipment
matched
Select the equipment
to be removed
message acknowledging the
equipment has been removed
Confirm your
choice
Settings
Set
BlueTooth
Mydevices
Delete
The handset has a LED and two buttons.
• Light
If the Bluetooth® handset is on its base, you do not need to press the Off-hook/On-
hook key to take or terminate the call. Just off-hook/on-hook the Bluetooth® handset.