Preface
xiv September 2011 Alcatel-Lucent 5620 Service Aware Manager, Release 9.0 R4
Optical Alarm Reference 3HE 06513 AAAD TQZZA Edition 01
Procedures with options or substeps
When there are options in a procedure, they are identified by letters. When there are
substeps in a procedure, they are identified by Roman numerals.
Example of options in a procedure
At step 1, you can choose option a or b. At step 2, you must do what the step
indicates.
1 This step offers two options. You must choose one of the following.
a This is one option.
b This is another option.
2 You must perform this step.
Example of substeps in a procedure
At step 1, you must perform a series of substeps within a step. At step 2, you must
do what the step indicates.
1 This step has a series of substeps that you must perform to complete the step. You
must perform the following substeps.
i This is the first substep.
ii This is the second substep.
iii This is the third substep.
2 You must perform this step.
Measurement conventions
Measurements in this document are expressed in metric units and follow the Système
international d’unités (SI) standard for abbreviation of metric units. If imperial
measurements are included, they appear in brackets following the metric unit.
Table 3 lists the measurement symbols used in this document.
Key+Key Type the appropriate consecutive keystroke sequence CTRL+G
Key–Key Type the appropriate simultaneous keystroke sequence CTRL–G
* An asterisk is a wildcard character, which means “any
character” in a search argument.
log_file*.txt
↵ Press the Return key ↵
— An em dash indicates there is no information. —
→ Indicates that a cascading submenu results from selecting a
menu item
Policies→Alarm
Policies
Convention Description Example
(2 of 2)
To Next Page
Loading...
