Off-hook/On-hook and Volume/Mute keys
Off-hook/On-hook: press this key to take or terminate a call.
Volume/Mute:
o Short successive presses to change the handset volume level (3 levels)
o Long press to ensure your caller no longer hears you
If the Bluetooth® handset is on its base, you do not need to press the Off-hook/On-hook key to take or
terminate the call. Just off-hook/on-hook the Bluetooth® handset
8.21 Installing a Bluetooth® headset (matching)
A multi-point Bluetooth headset can be provided by Orange Business Services.
This headset can be matched to your mobile phone and other communication devices at the same
time. For example, you can use the headset matched to your mobile and when you enter your office
the headset automatically matches to your office set too.
You can then answer a call using your Bluetooth headset or the Bluetooth Handset on the office set.
Before a Bluetooth® headset can be used, it must be correctly matched to the terminal. Before
performing the matching operation, the headset must be in detectable mode.
Reach the “Menu“ page
Settings Phone Bluetooth Adddevices
Searching for Bluetooth® equipment. Wait for the detected equipment type and address to be
displayed
Select the relevant equipment
Add
Validate your choice
Enter the PIN code of the headset *
Acknowledgement message and display of the headset icon on the terminal screen
*Refer to the user documentation supplied with the headset.
8.22 Using a Bluetooth® headset
Refer to the user documentation supplied with the headset.
8.23 Deleting a Bluetooth® accessory (headset, handset, etc.)
Reach the “Menu“ page
Settings Phone Bluetooth Mydevices
Display of the different equipment matched
Select the equipment to be removed
Remove dvc
Validate your choice
Message acknowledging the equipment has been removed
To Next Page
Loading...
