3EM23952AA
Issue 01, September 2009
9500 MPR General System Description
2-28
DS1 D-Connector Patch Panel
PN: 3DB16102AA
Qty: Up to 6per 9500 MPR node
DS1 D-Connector Patch Panel supports up to 32 protected
or unprotected DS1 (Tx and Rx) interfaces. DS1 D-
Connector Patch Panel provides 32 customer
interconnects using 37-position D-Sub connectors for
terminating traditional ABAM cable. Two SCSI to SCSI
cables are required per P32E1DS1 module and four SCSI
to SCI cables are required for protected pair of P32E1DS1
modules to transition the two module front panel SCSI
connectors to the DS1 D-Connector Patch Panel.
Table 3-A. 9500 MPR Unit Descriptions (cont.)
UNIT DESCRIPTION
To Next Page
Loading...
