Alcatel-Lucent Halo H3P - Page 12

Copyright @ALE 2020 All Rights Reserved
12
Web UI
Network->IP parameters-> Subnet Mask
Phone UI
Menu->Advanced (default password: 123456)Setting->Network->IP Config->IPv4
Settings-> S/net
Parameter
LocalEnetcfgRouter
config.<mac>.xml
Description
It configures the IPv4 default gateway.
Example:
LocalEnetcfgRouter = 192.168.1.254
Note: It works only if “LocalEnetcfgIpstack” is phone to IPv4, and
"LocalEnetcfgDhcpMode " is phone to Static.
Permitted
Values
IPv4 Address
Default
Blank
Web UI
Network->IP parameters-> Gateway
Phone UI
Menu->Advanced (default password: 123456)Setting->Network->IP Config->IPv4
Settings-> Gateway
Parameter
DmEnetcfgDns1
config.<mac>.xml
Description
It configures the primary IPv4 DNS server.
Example:
DmEnetcfgDns1= 202.101.103.55
Note: It works only if “LocalEnetcfgIpstack” is phone to IPv4, and
"LocalEnetcfgDhcpMode " is phone to Static.
Permitted
Values
IPv4 Address
Default
Blank
Web UI
Network->IP parameters-> DNS1
Phone UI
Menu->Advanced (default password: 123456)Setting->Network->IP Config->IPv4
Settings-> DNS1
Parameter
DmEnetcfgDns2
config.<mac>.xml
Description
It configures the secondary IPv4 DNS server.
Example:
DmEnetcfgDns2= 202.101.103.55
Note: It works only if “LocalEnetcfgIpstack” is phone to IPv4, and
"LocalEnetcfgDhcpMode " is phone to Static.
Permitted
Values
IPv4 Address
Default
Blank
Web UI
Network->IP parameters-> DNS2
Phone UI
Menu->Advanced (default password: 123456)Setting->Network->IP Config->IPv4
Settings-> DNS2
If you change this parameter, the IP phone will reboot to make the change take effect.