Alcatel-Lucent Halo H3P - Page 129

Copyright @ALE 2020 All Rights Reserved
129
Parameter
BackupuploadMethod
config.<mac>.xml
Description
It configures the way to upload files(post/put).
Permitted
values
0 - put
1 - post
Default
0
Parameter
CallLogBackupEnable
config.<mac>.xml
Description
It configures to enable or disable callLogBackup
Permitted
values
false
true
Default
false
User can also configure the IP phone to send syslog messages to a syslog server in real time.
The following table lists the parameters you can use to configure syslog logging.
Parameter
LogRemoteServerExist
config.<mac>.xml
Description
It configures to enable or disable syslog.
Permitted
values
false
true
Default
false
Web UI
Maintenance->Log Collection-> Syslog enable
Parameter
LogRemoteServerAddress
config.<mac>.xml
Description
It configures remote syslog server address.
Permitted
values
IP address or domain name
Default
empty
Web UI
Maintenance->Log Collection-> Syslog server
Parameter
LogRemoteServerPort
config.<mac>.xml
Description
It configures remote syslog server port.
Permitted
values
IP port
Default
514
Web UI
Maintenance->Log Collection-> Syslog port
Parameter
LogRemoteServerProtocol
config.<mac>.xml
Description
It configures remote syslog server protocol.
Permitted
values
udp – udp
tcp - tcp
Default
udp
Web UI
Maintenance->Log Collection-> Syslog protocol
User can use ping and traceroute diagnostics for troubleshooting network connectivity via phone
user interface.
User can go into the phone UI: Advanced Setting -> Net Diagnose, then input the IP address to
trigger ping or traceroute command. The diagnose result will be displayed on the screen.