Alcatel-Lucent Halo H3P - Page 130

Copyright @ALE 2020 All Rights Reserved
130
Connect the Internet port of the IP phone to the Internet and the PC port of the IP phone to a PC.
Before capturing the signal traffic, make sure the IP phone can span data packets received from
the Internet port to the PC port.
The following table lists the parameter you can use to configure span to PC port.
Parameter
SpanToPcType
config.<mac>.xml
Description
It enables or disables the IP phone to span data packets received from the WAN port
to the PC port.
Permitted
values
0 IDLE
1 LAN
Default
0