Wi-Fi feature enables you to connect the phones to the organization’s wireless network. The
wireless network is more convenient and cost-effective than the wired network. Wi-Fi feature is
applicable to Halo series phones H3W/H6/H6W.
When the Wi-Fi feature is enabled, the IP phone will automatically scan the available wireless
networks. All the available wireless networks will display in scanning list on the phone screen. You
can store up to 5 frequently used wireless networks on your phone.
You can configure for Halo series phones H3W/H6/H6W: Advanced Setting -> Wi-Fi -> Wi-Fi
Manager (phone user interface).
Note: H3W and H6W support built-in Wi-Fi, but do not support USB dongle Wi-Fi. They should be
distinguished from H6 (which only support USB dongle Wi-Fi).
To use Wi-Fi feature on Halo series phones H6, make sure the Wi-Fi USB dongle is properly
connected to the USB port on the phone. The Wi-Fi USB dongle should be purchased separately.
In Halo R120 release, H3W/H6/H6W phone supports for WiFi auto provision deployment.
The following table lists the parameters you can use to configure Wi-Fi.
To Next Page
Loading...
