Alcatel-Lucent Halo H3P - Page 38

Copyright @ALE 2020 All Rights Reserved
38
Valid Values: 1~15/1~8;
Halo series phones support 8 accounts
group_id_name
Specify which group the contact adds to.
Built-in group:
All Contacts, External Directory(Only M7 in
Halo series phone support)
Custom group:
XXX (for example, Friend)
default_photo
Built-in avatar:
Resource: avatar name
1. Open the local contact file.
2. To add a group, add <GroupName>Fn</GroupName> to the file. Each starts on a new line.
3. To add a contact.
For example:
<Contact>
<FirstName>三</FirstName>
<LastName>张</LastName>
<Account>1</Account>
<GroupName>All Contacts</GroupName>
<AvatarSmall>avatar_small_13</AvatarSmall>
<AvatarBig>avatar_large_13</AvatarBig>
<OfficeNumber>13003</OfficeNumber>
<MobileNumber>1860000001</MobileNumber>
<HomeNumber></HomeNumber>
<OtherNumber></OtherNumber>
</Contact>
4. Save the changes and upload this file to the phone Web UI or place this file to the provisioning
server.
You can upload local contact files to add multiple contacts at a time.
The following table lists the parameters you can use to upload the local contact files and resource.
Parameter
PhonebookUrl
config.<mac>.xml
Description
It configures the access URL of the local contact file (*.xml).
Example:
PhonebookUrl = http://192.168.10.25/contact.xml
Permitted
Values
URL within 511 characters
Default
blank
The following example shows the configuration for customizing a local contact file.