Customize the contact file “contact.xml” and place the contact file “contact.xml” to the provisioning
server http://192.168.10.25 .
Example:
PhonebookUrl = http://192.168.10.25/directory.xml
During auto provisioning, the IP phone connects to the provisioning server “192.168.10.25”, and
downloads the local contact file “directory.xml” .You can view the contacts on their phone, and
specify the avatar for a contact.
The following shows the custom contact Lily with corresponding avatar display:
LDAP is an application protocol for accessing and maintaining information services for the
distributed directory over an IP network. You can configure the IP phones to interface with a
corporate directory server that supports LDAP version 2 or 3. The following LDAP servers are
supported:
➢ Microsoft Active Directory
➢ Sun ONE Directory Server
➢ Open LDAP Directory Server
➢ Microsoft Active Directory Application Mode (ADAM)
Topics
LDAP Attributes
LDAP Configuration
The following table lists the most common attributes used to configure the LDAP lookup on IP
phones.