Alcatel-Lucent Halo H3P - Page 88

Copyright @ALE 2020 All Rights Reserved
88
The following table lists the parameter you can use to enable or disable keep mute if incoming calls
are answered automatically.
Parameter
SIPAutoAnsweredMuteX
H3P/H3G/H3W: (X=1-3)
H6/H6W: (X=1-4)
config.<mac>.xml
Description
It configures the keep mute feature for the IP phone.
Permitted
Values
BOOLEAN :false/true
Default
false
Web UI
Features->intercom-> Intercom Mute
Call transfer enables IP phones to transfer an existing call to a third party. For example, if party A
is in an active call with party B, party A can transfer this call to party C (the third party). Then, party
B will begin a new call with party C, and party A will disconnect.
Halo IP phones support call transfer using the REFER method specified in RFC 3515 and offer two
types of transfer:
➢ Blind Transfer - Transfer a call directly to another party without consulting. Blind transfer is
implemented by a simple REFER method without Replaces in the Refer-To header.
➢ Attended Transfer (Consultative Transfer) - Transfer a call with prior consulting.
Attended transfer is implemented by a REFER method with Replaces in the Refer-To
header.
Topics
Call Transfer Configuration
How to make Transfer call
Transfer Mode for Dsskey Configuration
The following table lists the parameters you can use to configure call transfer.
Parameter
TelephonyTransferAllowed
config.<mac>.xml
Description
It enables or disables the transfer feature for the IP phone.
Permitted
Values
BOOLEAN :false/true
Default
true
Parameter
TelephonyBlindTransferAllowed
config.<mac>.xml
Description
It enables or disables the blind transfer.
Permitted
Values
BOOLEAN :false/true
Default
true
➢ Blind Transfer call : party A is in an active call with party B, party A click Menu Transfer to
input party C Number , Then party A can transfer this call to party C (the third party) by
click Menu B Trsf , party B will begin a new call with party C, and party A will disconnect.