Alcatel-Lucent Halo H3P - Phone Customization and Advanced Features; Conference Call Management

Copyright @ALE 2020 All Rights Reserved
89
➢ Consultative Transfer call : party A is in an active call with party B, party A click Menu
Transfer to input party C Number, party A will begin a new call with party C by click Menu
Call , Then ,party A can transfer this call to party B (the third party) by click Menu Transfer ,
and party A will disconnect.
You can configure the transfer mode for the IP phone when transferring the current call via a
specified DSS key. Halo IP phones support the transfer modes: New Call, Blind Transfer.
The following table lists the parameter you can use to configure transfer mode for Dsskey.
Parameter
TransferKeyAsBlindTransfer
config.<mac>.xml
Description
It configures the transfer mode for DSS key. When the user presses the DSS Key during a
call, the DSS Key behavior depends on the transfer mode.
Permitted
Values
BOOLEAN :false/true
Default
false
Halo IP phones support local 5-way conference and multi-way network conference.
Topics
Local Conference Configuration
Network Conference Configuration
The local conference requires a host phone to process the audio of all parties. Halo IP phones
support up to 5 parties (including yourself) in a local conference call.
You can enable or disable the local conference feature, and configure the way to phone up a local
conference.
For Halo IP phones, you can merge two calls into a conference directly by tapping the Conf soft
key or Conf hard key