Alcatel-Lucent Halo H6 - Page 16

Copyright @ALE 2020 All Rights Reserved
16
http://172.24.190
.161
http://172.24.19
0.162
http://172.24.190.161
172.24.190.161
http(s)://172.24.190.16
1
172.24.190.161
http(s)://172.24.190.16
1/provisioning
172.24.190.161
http://172.24.19
0.162
http://172.24.190.162
http(s)://provisioning
http://172.24.19
0.162
http://172.24.190.162
Note: If user configures a relative path with only IP address or domain name for DHCP option
66/67, the default https protocol will be added to the provisioning URL.
Halo series phones support using the NTP server address offered by DHCP.
DHCP option 42 is used to specify a list of NTP servers available to the client by IP address.
The following table lists the parameter you can use to configure DHCP option 42 NTP server
address.
Parameter
DmEnetcfgSntp
config.<mac>.xml
Description
It configures the primary NTP server.
Example:
DmEnetcfgSntp = 192.168.0.100
Permitted
Values
IPv4 Address
Default
0.pool.ntp.org
Web UI
Setting->Time&Date -> SNTP Address
Parameter
DmEnetcfgSntp2
config.<mac>.xml
Description
It configures the secondary NTP server.
Example:
DmEnetcfgSntp2 = 192.168.0.100
Permitted
Values
IPv4 Address
Default
time.nist.gov
Web UI
Setting->Time&Date -> SNTP Secondary Address
You can specify a hostname for the phone when using DHCP. The DHCP client uses option 12 to
send a predefined hostname to the DHCP registration server. The name may or may not be
qualified with the local domain name (based on RFC 2132). See RFC 1035 for character phone
restrictions.