Alcatel-Lucent OmniPCX Office

Type Message Location Additional Information Action
206 4070 IO/EO BASE: ER-
RORS DETECTED DUR-
ING INITIALIZATION
PHASE OF BOOT PRO-
GRAM (RESET)
Board location.
Interface mark-
er
207 4070 IO/EO BASE: ER-
RORS DETECTED DUR-
ING SOFTWARE DOWN-
LOAD PHASE
Board location.
Interface mark-
er
208 4070 IO/EO BASE: TRANS-
MISSION BUFFER FULL
Board location.
Interface mark-
er
209 4070 IO/EO BASE: TRANS-
MISSION BUFFER FULL
Board location.
Interface mark-
er
210 4070 IO/EO BASE: A MES-
SAGE IS SENT TO THE
BASE WITH A FALSE LINK
IDENTITY
Board location.
Interface mark-
er
212 4070 IO/EO BASE:
WRONG LINE LENGTH
Board location.
Interface mark-
er
213 4070 IO/EO: RECEPTION
OF AN ERRONEOUS
MESAGE
Interface mark-
er
214 4070 IO/EO: RECEPTION
OF AN ERRONEOUS FRE-
QUENCY PLAN
Board location.
Interface mark-
er
215 4070 IO/EO BASE:
WRONG LINE LENGTH
Board location.
Interface mark-
er
216 4070 IO/EO BASE: RECEP-
TION OF AN ERRONEOUS
MESSAGE
Board location.
Interface mark-
er
217 4070 IO/EO BASE: RECEP-
TION OF AN ERRONEOUS
FREQUENCY PLAN
Board location.
Interface mark-
er
220 DSP OUT OF SERVICE ON
ONE OF THE BOARDS
Board location. INFO 0 = DSP number
INFO 1 = cause (resource problem,
DSP overload, etc)
% *
 ! "#$ ! % $& !     
27/62