8.1 Maintenance
8.1.1 Start Monitoring
It is possible to follow the progress of the start in 2 ways:
- On the display of the dedicated stations
- Using the Web-Based Tool
8.1.1.1 On Station
The display on the dedicated set indicates the different steps for starting the system with
following elements: Start x.y (x is the step and y the sequence)
8.1.1.1.1 Detail:
- Start 2-6: detection of the cards of the main cabinet
- Start 2-5: search of extension 2 and loading of the DSP if the extension exists
- Start 2-4 : detection of the expansion card 2 (optionnal)
- Start 2-3: search of extension 2 and loading of the DSP if the extension exists
- Start 2-2: detection of the expansion card 2 (optionnal)
- Start 2-1: end of detection of telephony (appearance of virtual cards XRA IVPS)
- UNBLOCKING of the telephony (stations are operational)
- Normal display
8.1.1.2 Web-Based Tool
See: Web-Based Tool - Web-Based Tool
8.1.1.3 Console Port
To follow progress of start-up on the console port, use the following characteristics:
- Login: swap_serial
- Password: alcatel
!
! "#$ ! % $& !
55/62
To Next Page
Loading...
