7.1.2 PowerCPU EE board used
When maintaining and exchanging a PowerCPU EE board, the data stored in the MSDB
(Mass Storage Daughter Board) 8 GB equipped with eMMC (embedded Multi-Media Card) will
be restored by applying the following procedures.
7.1.2.1 Procedure to Exchange a PowerCPU EE
7.1.2.1.1 The MSDB 8 GB equipped with eMMC is not faulty and does not have to be
exchanged
- Install the old MSDB 8 GB equipped with eMMC in the new PowerCPU EE board
- After a cold reset of the system, launch the "Data restore" process via the OMC:
• Select Comm ->Write to PBX, select the box Voice Prompts (screen "Write to
PBX"). All information saved on the MSDB 8 GB equipped with eMMC is normally
available (including voice messages and recorded conversations).
7.1.2.1.2 The MSDB 8 GB equipped with eMMC is faulty and has to be exchanged
- All messages, recorded conversations and NMC call detail records are lost.
- The cache memory is also lost.
- Launch the "Data restore" process via the OMC to restore voice files (voice prompts):
• Select Comm ->Write to PBX, select the box Voice Prompts (screen "Write to
PBX")
Chapter
7
-
54/62
! "#$ ! % $& !
To Next Page
Loading...
