FEATURES
6 Alcatel-Lucent | Alcatel-Lucent OmniStack 6200
Simplified manageability
I Dual image and multiple configuration file storage provides backup
I Industry standard CLI with a familiar interface reduces training costs
I Easy-to-use point-and-click web based element manager with built-in help for easy
configuration of new technology features
I Remote telnet management or secure shell
I Port based, port mirroring for troubleshooting
I Human readable ASCII-based config files for offline editing and bulk configuration
I IGMPv1/v2/v3 snooping to optimize multicast traffic
I IGMP querier for non-routed multicast network configuration
I BootP/DHCP client allows auto-config of switch IP information to simplify deployment
I Auto-negotiating 10/100/1000 ports automatically configure port speed and duplex setting
I Auto MDI/MDIX automatically configures transmit and receive signals to support straight thru
and crossover cabling
I SNMPv1/v2/v3
I Supports RFC 2819 RMON group (1-Statistics, 2-History, 3-Alarm & 9-Events)
I Simple Network Time Protocol (SNTP) for network wide time synchronization
I Alcatel-Lucent Mapping Adjacency Protocol (AMAP) for building topology maps
within OmniVista
I IEEE 802.1ab (LLDP) and LLDP-MED extensions for network discovery, topology and easier
VoIP deployment
I Virtual cable tester provides switch-based integrity testing on copper Ethernet cabling
I Event logging and remote SYSLOG support
VLAN support
I 255 VLANs
I 4,094 VLAN tag value support
I Per port, 802.1Q, MAC, IP subnet and protocol VLAN
I Per service VLAN stacking (Q-in-Q) with per port and inner VLAN classification
I Multicast TV VLAN registration per port for maximum bandwidth efficiency between edge
and core.
High availability
I 802.1w rapid recovery spanning tree allows sub-second failover to redundant link
I 802.1d spanning tree for loop free topology and link redundancy
I 802.1s multiple spanning tree
I Fast forwarding mode on user ports to bypass 30-second delay for spanning tree
I Static and 802.3ad dynamic link aggregation that supports automatic configuration of link
aggregates with other switches.
I Broadcast storm control
I Redundant 1:1 power
I Fault tolerant loop stack topology
Quality of service
I 802.1p, TOS, DSCP marking
I QoS mapping: 802.1p to TOS/DSCP, TOS to 802.1p/DSCP, DSCP to 802.1p/TOS
I Classification per port, 802.1p(COS) value, MAC SA/DA, Ethertype, TOS precedence, DSCP
value, ICMP code and type, IP SA/DA, IP protocol, TCP/UDP port
I Classification per inner VLAN for VLAN stacking configuration
I Four egress queues per port that support strict and WRR queuing algorithms
I Ingress bandwidth rate limiting per port/flow
I Egress bandwidth rate limiting per port/queue
To Next Page
Loading...
