Need help?Do you have a question about the Alcatel-Lucent OmniSwitch 6400-P48 and is the answer not in the manual?
General| Model | OmniSwitch 6400-P48 |
|---|---|
| Port Configuration | 48 x 10/100/1000BASE-T ports |
| Switching Capacity | 176 Gbps |
| Forwarding Rate | 131 Mpps |
| Power over Ethernet (PoE) | Yes, PoE+ |
| VLANs | 4094 |
| Dimensions | 440 x 420 x 44 mm |
| Uplink Ports | 4x 10G SFP+ ports |
| Ports | 4 x SFP+ |
| MAC Address Table Size | 32, 000 |
| Power Supply | Dual power supplies |
| Management | CLI, SNMP |
| Dimensions (W x D x H) | 440 x 420 x 44 mm |
| Operating Temperature | 0°C to 45°C |
| Operating Humidity | 10% to 90% (non-condensing) |
| Jumbo Frame Support | 9216 bytes |
Details on the various chassis models within the OmniSwitch 6400 series.
Detailed specifications for all OmniSwitch 6400 chassis models.
Steps for booting switches in stand-alone and stacked configurations.
Details on configuring PoE parameters, priority, and monitoring.
Concepts of stack operation and roles within a virtual chassis.
Methods for determining the primary management module in a stack.
Methods for selecting the secondary management module in a stack.
Ensuring network continuity through redundant stacking connections.
Procedures for adding, removing, and merging stack modules.
Procedures for reloading primary, secondary, idle, and pass-through modules.
To Next Page