Need help?Do you have a question about the Alcatel-Lucent OmniSwitch 6250-24M and is the answer not in the manual?
General| Model | OmniSwitch 6250-24M |
|---|---|
| Product Type | Switch |
| Manageable | Yes |
| Power over Ethernet (PoE) | No |
| Switching Capacity | 56 Gbps |
| Jumbo Frame Support | Yes |
| Operating Temperature | 0°C to 45°C |
| Storage Temperature | -40°C to 70°C |
| Port Configuration | 24 x 10/100/1000Base-T |
| Uplink Ports | 4 x SFP |
| Form Factor | Rack-mounted |
| MAC Address Table Size | 16000 entries |
| Dimensions (W x D x H) | 440 x 44 mm |
| Operating Humidity | 10% to 90% non-condensing |
| Storage Humidity | 5% to 95% non-condensing |
| Power Supply | AC 100-240V |
Details technical specs and procedures for chassis and components.
Provides complete reference for all CLI commands supported by the product.
Details Alcatel-Lucent technical support services and access methods.
Lists the available OmniSwitch 6250 chassis configurations.
Highlights extensive security features for network access and containment.
Describes hardware and software safeguards for high availability and resilience.
Covers automatic monitoring via sensors and user-driven monitoring via CLI.
Describes the eight-port stackable Metro model.
Describes the twenty-four port stackable Metro model.
Describes the twenty-four port Metro model with DC power.
Describes the twenty-four port stackable Enterprise model.
Describes the twenty-four port Enterprise model with PoE.
Details the internal 30W AC power supply for OmniSwitch 6250 switches.
Provides system power for the OmniSwitch 6250 switches.
Provides system power and can be installed as a redundant supply.
Provides system and PoE power, installable as primary or backup.
Provides connection considerations for backup DC power brick.
Describes what happens when the switch exceeds its operating temperature threshold.
Provides recommendations for ensuring proper cooling of the switches.
Specifies minimum clearances for chassis cooling and access.
Emphasizes the importance of reliable earthing for rack-mount equipment.
Details the process of attaching the power supply tray to the side of the chassis.
Shows side installation of chassis and power supply tray for rack mounting.
Describes attaching slot-brackets to the chassis using screws.
Provides important guidelines before installing switches in a rack.
Details the step-by-step process for rack-mounting the switch assembly.
Provides connection considerations for internal DC power supply.
Covers configuring PoE settings on the switch via CLI commands.
Emphasizes the requirement for properly wired and earthed receptacles.
To Next Page