Mounting OS6250 Switches
page 3-2 OmniSwitch 6250 Hardware Users Guide June 2012
Available Mounting Kits
The mounting kits listed below are available.
Kit Description
OS6250-RM-19 Universal 1/2 width tray kit for mounting one 1/2 width OS6250 switch in a
19" rack.
OS6250-DUAL-MNT Two mounting and sliding brackets to mount two OS6250 switches in a 19"
rack.
OS6250-RM-19-L Simple L-bracket for mounting one OS6250 switch in a 19" rack.
OS6250-REAR-MNT Mounting brackets to stabilize the rear of unit in the back of a 19" rack.
Hardware to mount the rear of two 6250 units in a 19" rack.
OS6250-WALL-MNT Wall mounting kit for OS6250-8M only. Contains universal mounting brack-
ets and screws for wall mounting an OS6250-8M.
To Next Page
Loading...
