Booting 6250 Switches Monitoring the Chassis
OmniSwitch 6250 Hardware Users Guide June 2012 page 4-7
Using LEDs to Visually Monitor the Chassis
The front and rear panel of OmniSwitch 6250 switches provides status LEDs that are useful in visually
monitoring the status of the switches. LEDs include:
• Ethernet Port LEDs
• System Status LEDs
• Combo Port Status LEDs
For tables showing LED states operating normally, refer to “LED Status” on page 2-20.
Installing SFP and XFP Transceivers
For information on installing XFPs and SFPs, refer to the OmniSwitch Transceivers Guide.
To Next Page
Loading...
