OmniSwitch 6250-P24 OmniSwitch 6250 Chassis and Hardware Components
page 2-18 OmniSwitch 6250 Hardware Users Guide June 2012
OmniSwitch 6250-P24 Rear Panel
Note. The figure shows a pre-production version of the chassis without product, safety, and compliance
information labels. All production versions of the chassis have these labels.
OS6250-P24 Rear Panel
Refer to “LED Status” on page 2-20 for LED status information.
Item Description
A
Push Button
When pushed all LEDs will turn off and the LED of the Stack ID
will remain lit.
B
Console Port
RS-232 console port with an RJ-45 connector. Provides access to
the CLI for configuration and management.
C
Grounding Block
Type LCD8-10A-L grounding lug
D
USB Port
High speed USB 2.0 port.
E
HDMI Stacking Connectors
Connectors for use in stacking switches into a virtual chassis or as
an uplink port.
F
Backup Power Supply Connector
G
Main Power Supply Connector
To Next Page
Loading...
