Do you have a question about the Alcatel-Lucent OmniSwitch 6250-M and is the answer not in the manual?
Jumbo Frame Support | Yes |
---|---|
Manageable | Yes |
Form Factor | Fixed |
Ports | 24 x 10/100/1000Base-T |
Routing Protocol | RIP |
Power Supply | AC |
Dimensions (HxWxD) | 1.73 x 17.32 x 14.17 in |
Operating Temperature | 0 °C |
Weight | 5.6 kg |
Describes the components and specifications of the OS6250-8M model.
Details the components and specifications for the OS6250-24M/24MD models.
Outlines the components and specifications for the OS6250-24 model.
Describes the components and specifications of the PoE-enabled OS6250-P24 model.
Explains the meaning of various LED indicators on the chassis.
Details the different power supply options and their specifications.
Details the procedures for installing switches in a standard equipment rack.
Describes how to connect the chassis to AC and DC power sources.
Lists the technical specifications for PoE support.
Guides on setting PoE operational status and port power allocation.
Details how to adjust power limits for individual PoE ports.
Explains how to set the overall PoE power budget for the switch.
Covers CLI commands for monitoring PoE statistics and port status.
Defines the different roles switches assume within a stack (primary, secondary, idle).
Explains methods for selecting the primary switch in a stack.
Explains methods for selecting the secondary switch in a stack.
Provides steps to resolve pass-through issues caused by duplicate slot numbers.
Details the required stacking cable connections for switches in a stack.
Explains the importance and setup of redundant stacking cables for failover.
Covers methods for assigning unique slot numbers to modules in a stack.
Explains how to add or remove idle modules without disrupting the stack.
Details procedures for reloading switches in various stack roles.
Explains the process and implications of rebooting the entire virtual chassis.
Emphasizes the need for proper grounding for electrical safety.