Mounting OS6250 Switches Assembling OS6250 Switches
OmniSwitch 6250 Series Hardware Users Guide September 2009 page 3-13
Preliminary
9/28/09
3 Secure the bracket and power supply using the retaining strap. Secure the retaining strap to the power
supply tray using the attachment screws (provided).
Secure Power Brick With Strap
Power Supply Module Installation
1 Place the power supply into the power supply tray with the connector pins facing the chassis.
2 Slide the power supply forward, aligning the guide posts with the holes in the chassis.
3 Firmly seat the power supply to the chassis and ensure the power supply tabs on the front bottom of the
power supply slide into the slots on the power supply tray.
Securing Power Supply Module in Tray - Update
4 Secure the power supply to the power supply tray using the captive thumb screw.
Retaining strap
Retaining Strap Screws
Thumb Screw
To Next Page
Loading...
