Mounting OS6250 Switches Assembling OS6250 Switches
OmniSwitch 6250 Series Hardware Users Guide September 2009 page 3-9
Preliminary
9/28/09
Attaching Two Chassis Side-by-Side
Two chassis can be assembled side-by-side with the power supply trays attached to the back of the chas-
sis, if necessary, for mounting into a standard 19-inch rack as show in the figure below.
Fully Assembled Side-by-Side Chassis Assembly - Update
1 Attach the slot-bracket to the front and back of one chassis using four attachment screws (M3 flat head)
provided for each bracket.
Attach Slot-Brackets
2 Attach the slide-bracket to the front and back of the other chassis using the four attachment screws (M3
flat head) provided for each bracket.
Front center mounting brackets.
Rear center brackets.
To Next Page
Loading...
