Booting 6250 Series Switches Monitoring the Chassis
OmniSwitch 6250 Series Hardware Users Guide September 2009 page 4-7
Preliminary
9/28/09
Using LEDs to Visually Monitor the Chassis
The front and rear panel of OmniSwitch 6250 Series switches provides status LEDs that are useful in visu-
ally monitoring the status of the switches. LEDs include:
• Ethernet Port LEDs
• System Status LEDs
• Combo Port Status LEDs
For tables showing LED states operating normally, refer to “LED Status” on page 2-20.
Installing SFP and XFP Transceivers
For information on installing XFPs and SFPs, refer to the OmniSwitch Transceivers Guide.
To Next Page
Loading...
