Stacking Cables OmniSwitch 6250 Chassis and Hardware Components
page 2-30 OmniSwitch 6250 Hardware Users Guide June 2012
Stacking Cables
The following cables and transceivers can used for stacking switches into a virtual chassis. Depending on
the length and stacking requirements, either copper or fiber can be used. Enterprise models support two
HDMI stacking ports and Metro models support two SFP+ stacking ports for use with SFP+ direct
attached copper cables.
SFP+ Direct Attached Copper- Squeeze Tab
SFP+ Direct Attached Copper - Pull Tab
HDMI Stacking Cable
Cable Types Lengths
Copper - SFP+ Direct Attached
(Metro Models)
30/60/150 centimeters
HDMI (Enterprise Models) 30/60/150 centimeters
To Next Page
Loading...
